Derailleur Hanger Kit - Locking Rear Axle

$25.00

Excluding sales tax and Import Duty

Derailleur Hanger Kit Fits (2017 and up Primer, Tracer, Carbine, M16) - Part 340177. Required if your bike uses rear axle #130757. Refer to owner's manual to confirm. Not compatible with Sniper model.

This kit includes parts:

- 130790 Derailleur Hanger 2015 models & up Black (x1)

- 130798 Bolt Hanger M16 Black (x1)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

Flack Guard Kit (M16)

$45.00

Excluding sales tax and Import Duty

Flack Guard Kit M16 (Fits all builds Factory, Pro, Expert) - Part 340180

This kit includes parts:

- 500239TW Flack Guard Downtube Black (1x)

- 500240TW Flack Guard Chainstay Black (1x)

- 500245TW Flack Guard Seatstay Black (1x)

- 500252TW Protective Tape 150x30x.6 (2pcs)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Axle Kit

$35.00

Excluding sales tax and Import Duty

M16 Axle Kit - Part 340170

This kit includes parts:

- 130794 Axle Rear 157x12mm M16 Black (x1)

- 130807 Spacer Cone Adjuster 8.3mm (short) Black (x1)

- 410039 Bolt SHCS M6x25 SS (x1)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Bumper Kit

$15.00

Excluding sales tax and Import Duty

M16 Bumper Kit - Part 340175

This kit includes parts:

- 140009 Bumper M16 YF left side (x1)

- 140010 Bumper M16 YF right side (x1)

- 410041 Bolt SHCS M5x16 Button Head (x2)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Grommet Kit

$13.00

Excluding sales tax and Import Duty

M16 Grommet Kit - Part 340187

This kit includes parts:

- 140041 Grommet Rubber (x1)

- 140052 4MMID Guide Cable (x1)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Lower Bearing Kit

$45.00

Excluding sales tax and Import Duty

M16 Lower Bearing Kit- Part 340194

This kit includes parts:

- 130754 Crush Tube M16 (x2)

- 430007 Bearing 7902 (x4)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Lower Link Hardware Kit

$50.00

Excluding sales tax and Import Duty

M16 Lower Link Hardware Kit - Part 340200

This kit includes parts:

- 130778 Cap Bearing Black (x4)

- 130795 Main Pivot Bolt1.5t M16 (x2)

- 130807 Cone Adjuster Spacer 8.3mm (x2)

- 140004 Plug Trim (x2)

- 401011 Zerk Fitting m6x1.0x7 (x2)

- 410009 Bolt M6x22 (x2)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Shock Hardware Kit

$10.00

Excluding sales tax and Import Duty

M16 Shock Hardware Kit - Part 340211

This product includes parts:

410045 - Bolt Button Head M5x8x.8 (x1)

410046 - Shock Bolt M16, M6 Thread, Steel (x1)

410047 - Shoulder Bolt Internal Thread Sleeve M8x19 Steel (x1)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Shock Hardware Kit (Titanium)

$45.00

Excluding sales tax and Import Duty

M16 Shock Hardware Kit (Titanium) - Part 340212

This product includes parts:

410042 - Bolt Button Head M8x35 Titanium (x1)

410043 - Shoulder Bolt Button Head M8x25 Titanium (x1)

410044 - Shoulder Bolt Internal Thread Sleeve M8x19 Titanium (x1)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Top Link Bearing Kit

$25.00

Excluding sales tax and Import Duty

M16 Top Link Bearing Kit - Part 340215

This kit includes parts:

- 430001 Bearing 6901 (x2)

- 430008 Bearing 6802 (x2)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.

M16 Top Link Hardware Kit

$60.00

Excluding sales tax and Import Duty

M16 Lower Link Hardware Kit - Part 340217

This kit includes parts:

- 130766 Shoulder Bolt Fine Thread (x2)

- 130780 Upper Pivot Axle (x1)

- 130784 Shoulder Bolt Washer (x2)

- 130785 Shoulder Bolt Fine Thread (x1)

- 130789 Upper Axle Spacer (x2)

FREQUENTLY ASKED QUESTIONS

How long is the warranty period for my Intense?
- 5-year limited warranty on carbon frames (except Downhill)
- 3-year limited warranty on XC/Trail/Endurol aluminum and carbon Downhill frames
- 2-year limited warranty on aluminum Downhill and Enduro frames
What is the widest tire that will fit my bike?
- With the wide variety of rim widths and tire dimensions,there is no way to accurately determine what your actual tire width will be with your component spec. A general rule of thumb is 2.4 for xc/trail, 2.6 for enduro/downhill and 3.0 for plus tire frame options.
Is my frame compatible with Eagle?
- All Intense mountain bikes featuring 142mm and boost 148 rear wheel spacing will fit SRAM Eagle Drivetrain with the appropriate offset front chain ring. 6mm offset for non boost applications and 3mm offset for 148 boost applications.
What type of bottom bracket do I need for my bike?
- We use the bottom bracket we feel best suites the...
Where is my serial number located?
- The serial number on your Intense frame is located on the front triangle on the back/underside of the bottom bracket. The serial number for the rear triangle is located on the forward facing surface of the cross brace.
What are the shock size specs for my bike? ( Eye to Eye and Stroke) (Reducer Size)
- If you have a question of shock hardware specs, please call or email into our customer service hotline. Info is located in the “service” tab. Otherwise please visit ROCK SHOX or FOX for specifications.
What is the longest dropper post that will fit in my seat tube? (Maximum Insertion)
- The maximum length of your dropper post is based solely on the size frame you are using and the lower tube length of the dropper post used. All of our frames are capable of at least a 150mm dropper post but are capable of running a dropper post with a lower tube length up to…... Lets find out what our finished and reamed depth is for our frames.
How much sag should I run on my rear shock?
- Intense recommends that your sag be set at 30% for all xc/trail/enduro models and 35% for the downhill models. For a demonstration and more information, check out the tech video ( click here).
How much does a particular frame, or built model weigh?
- The specific frame/bike weight will be listed on our website under your bikes product page. You can also see a chart with frame and bike weights here. (Please note that a variable of 100G should be given).
Where can I purchase a particular part for my Intense?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top OR click here to be directed to our small parts web store. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
Is there touch up paint available for my bike?
- No, currently there is not touch up paint option available yet. This is still under development.
Can I use an Angle set headset for my bike?
- Yes, all our external headset cup frames are capable of running an angle set headset. Although with most of our bikes and our JSTuned geometry, typically the bikes geometry are matched with our component spec to make that particular bike perform at its best for its intended use.
What is the recommended spring rate for my bike and body weight?
- For specific sag measurements and suspension set up, please refer to the user manual for your model of bike. Or, click here to see the tech video demonstration.
How can I register my bike?
- Registering your new intense is quick and easy. From our home page, click on the “service” tab. Then select “register your ride”, fill out the required fields and your registration will be complete. Click on this register my bike link.
Can I purchase parts directly through you?
- Yes, small parts are available for all current and some previous models of bikes going back 3 years. You will find this tab on our website home page on the top. If your model of bike is not listed on the website, please call into or email our customer service hotline. Info for this is on the “service” tab on the home page.
I am the second owner of my bike, Do I still have a warranty?
- Intense promises that new Intense frames will be free from defects in materials and workmanship. This limited warranty applies to the original owner only and is nontransferable. The original owner must register his purchase within 90 days on the Intense website www.intensecycles.com/register. Intense will, at its discretion, repair or replace any frame that it determines to be manufacturing defective during the warranty period. In order to exercise your right under the Intense Cycles Limited Warranty, the frameset must be presented to an authorized Intense dealer, Intense distributor or to Intense Cycles, Inc., together with the proof of purchase.
Can I ride my bike if I see a crack/dent on the frame?
- You should always do a post-ride and pre-ride bike check. Click here to see how. If while doing your pre ride or post ride inspection of your frame and all its components you see a dent, crack or surface imperfection, please contact your local intense dealer or email or call into our service hotline. you will find this information under the service tab on our home page.
Do you still make Intense BMX Bikes?
- No, we no longer are apart of the intense brand of BMX bikes.
How much torque should I use to tighten my bolts?
- The torque settings, as with any high performance machine are very important to reliability and overall performance. The specific torque values are located in the user manual. Or, you can click here to see the tech video.
Is there an owner’s manual for my bike model?
- The user manual for your specific model of intense bike is located in the accessory box shipped with your intense bike or you can download it from the bike manual page on our website.
Where can I demo an Intense bike at?
- Click here to see a schedule of upcoming demo events.
How do I know it's time to have my bike serviced
- As a responsible owner of your high performance mountain bike, it is important to stay on your scheduled maintenance program. Preventing problems from happening should be your number one priority to ensure the best performance, reliability, safety and life out of your Intense mountain bike. For more information on how to maintain your bike properly please check out the tech video here.
What is recommended for seatpost and seat tube care?
- Intense recommends that the seatpost be installed with a thin coating of waterproof grease. This is something that should be checked, cleaned and re-prepped quarterly.